Відео

Thank you Roy.i didn't know why that wouldn't come out lol

@IDCWoodcraft perhaps it's a case of; in the words of the imortal Robin Williams, Rented Lips... lol 😆 🤣 😂

Got 3!!

Clay from Cincinnati… got two sets today. Liberty is awesome!

JeffC-ct5jj, typically, CNC hold down vacuum system manages dust by integrating with dust collection systems that capture debris before it reaches the vacuum pump. Perforated spoilboards and zoned vacuum systems help trap dust on the surface, making it easier to remove.

lylehandeland8020, Thank you for your kind words, Lyle! I'm glad you find the explanations helpful. Stay tuned for more videos!

dougharshbarger1700, You're welcome! I'm glad I could help you out. Enjoy your new sanding brushes!

JeffC-ct5jj, I'm glad you find the information helpful! Deep inlays can create some stunning effects. A good place to start would be to experiment with different bit sizes and depths to achieve the desired effect. I have a video that is for Vectric users but it should be able to help you quite a lot in Carbide Create too brother! Here is a link: ua-cam.com/video/Naxq3SbQH50/v-deo.htmlsi=0rClZxe2ZdMVGRPS

jimmytherazor, Thank you for the feedback! I'll work on making my videos more concise and to the point in the future.

ozguzzi, Glad you enjoyed the video! Thanks for watching!

hen334, Thank you for the kind words! I'm glad you enjoyed the video!

CavemanGrow, I apologize for not including the link to the file in the description. Here is a link to the file: www.etsy.com/listing/1315514723/longmill-mk2-30x48-cnc-router-spoilboard

Great question! The unit comes with rubber plugs that seal the holes.

ReallyBadJuJu, Don't worry, the Shapeoko 5 Pro is still a great machine brother!

@@IDCWoodcraft Sister. :-) And yeah it is! But it was $2k more and doesn't have closed-loop motors, I had to build my own table, and the Carbide 3d ecosystem is a bit more "closed" these days. It's not an XCarve in that respect, but it's a bit more proprietary and unfriendly to mods than it's legacy reputation would have suggested. On the whole, I'm not unhappy with my purchase, but had the Altmill been around when I ordered my S5Pro, I'd have chosen the Altmill.

StubbsMom, I'm glad the video helped you avoid any mishaps! To clean the burn residue off your down bit, you can try soaking it in a mixture of warm water and vinegar for a few hours, then scrubbing it gently with a brass brush. This should help remove the baked-on residue without damaging the bit.

donaldbrunswick, Unfortunately, the Live Chat is only available to viewers watching the live stream in real-time. It's a feature designed to enhance the experience for live viewers and promote real-time interaction between the audience and the creator. Sorry I cant help on this one my friend.

BungalowBill58, That's great to hear that you're interested in the system! You might want to consider customizing your spoilboard size to fit your needs. As for shipping to Australia, it's always a good idea to check with the supplier for the most up-to-date rates. It's usually possible to get the vacuum pump with the appropriate plug for your region. Hope this helps!

SteveSpears-xg6ze, I'm glad I could help you understand construction lines better! They're really useful for planning out your woodworking projects before getting started. Keep practicing with them and you'll see how much they can improve your accuracy!

3sonssigns, Thank you so much! I'm glad you enjoyed it.

AllenHorn0507, Thank you so much for the support and kind words! I'm glad you found the video helpful..

georgeumberger4254, Thank you for your kind words! I'm glad you find the videos helpful. Keep practicing and you'll improve even more!

titotorres5456, You're welcome! Happy woodworking!

SteveSpears-xg6ze, Yes, once you've closed all 3 vectors, you can group the 4 objects together to cut them simultaneously, saving time and ensuring they align perfectly on the material. This will allow your CNC machine to follow one toolpath for all objects in one go.

matthewswart1071, Thanks for the suggestion brother!

MrStebe120, good point my friend. I can definitely see your perspective on this one.

thetechnician832, Hey there! It's great that you're diving into the world of CNC woodworking. Setting up a macro for the touch probe should involve creating specific G-code commands to instruct the machine on how to use the probe for locating the workpiece accurately. I'd recommend referring to the machine's user manual or reaching out to the manufacturer for guidance on how to set up the probe macro safely. Good luck with getting the CNC up and running for the students!

armandocrespo2290, its called oramask brother! Here is a link: shrsl.com/36t5i

tec4ever72, Thank you so much! I appreciate your kind words about my work and hair color. It's always fun to change things up every now and then!

cunninghamguitarz5216, Thank you, Garrett! I'm glad you find the content informative my friend.

Send me an email and we will send it right to you garrett@idcwoodcraft.com

emostorm7, Haha, good one brother!

MyLifEcademy-sr4hy, Thank you so much for your kind words! I'm glad you're enjoying the videos. Keep creating amazing projects!

Hey Bob. I'll keep that in mind. But please remember, I teach how I teach

timc2797, I'm glad my video made you laugh brother!

kevinfinney8849, Not quite yet brother. Although you can get one yourself at PWNCNC. Here is a link: pwncnc.com/products/spindle?ref=IDCWOODCRAFT Be sure to use the discount code IDC5 for 5% off!

timc2797, Haha, I appreciate the humor! It's all about having fun and creating something unique, right?

RussReid, Glad you liked this one brother!

chubbyboy2242, You're welcome! Happy to help.